There are many reasons why car windows get stuck. The way to check and repair stuck car glass is quite simple, you can do it yourself at home.
Contents
The structure of car electric windows includes: control motor (including motor, gear transmission and sensor) and window lifting/lowering part (including lifting lever and X-shaped lever mechanism).
The operating principle of car electric windows is as follows: When the switch is pressed, the motor will change the direction of rotation, causing the gear transmission to move according to the impact on the window lifting/lowering part. The rotation of the motor is converted into an up and down motion that helps the glass door raise or lower.
See more: How to handle scratched or cracked steering glass
When you press the switch, if you don’t see the glass move or there’s no squeaking sound, there’s a high possibility that the electric window motor is broken, causing the car’s glass to get stuck.
Another cause of stuck car windows is worn, cracked or broken gears. Because the glass door raises/lowers a lot, the gears often wear out easily.
If the cable breaks or gets stuck in the shaft, it can cause the car window to jam. In addition, a jammed windshield can also be caused by a misaligned door gasket. With this error, when you press the switch, the motor still rotates but the glass door does not move.
A stuck car window could be due to a blown fuse in the window electrical system. When the fuse is blown, the motor that controls the glass door will not work, causing the door to get stuck.
To fix a stuck car window, you need to check and find the exact cause. The steps to check car windows are as follows:
Step 1: Check the fuse
If you press the switch but the window motor does not work, you should first check the car window fuse. An LED circuit tester can be used to check fuses. If this device is not available, you can always replace the spare fuse. If you have checked the fuse and found that the fuse is normal or have replaced a new fuse but the glass door is still stuck, do the next check.
Step 2: Remove the car door panel
Car door panels are usually fixed with screws on the door edge and door handle. Just unscrew all these screws to open the car door panel.
Step 3: Check the wiring system
Check to see if the wiring is stuck? If it gets stuck, it will cause the glass door to become dislodged. Also check to see if the wiring system is still working well, is it cracked or broken?
Step 4: Check the door gasket
Check to see if the door seal is misaligned, causing the car window to get stuck? If the cushion is worn loose, replace it with a new one.
Step 5: Check the motor
Finally check the door motor. If the door motor does not work or operates weakly, it should be repaired or replaced with a new motor.
Step 6: Put everything back in place
After checking and finding the cause and handling it, install everything back to its original position.
See more at: Car Care Vip
There are many reasons why car windshields are scratched. The most common of which is due to the… Read More
Car smoke that smells burnt, smells like gasoline, smells sweet... is a sign that the… Read More
Steps to change car spare tire : Step 1: Park in a safe place, on flat terrain Before changing… Read More
The car anti-theft warning system is a type of security device that helps take measures to protect… Read More
4Matic is a full-time four-wheel drive system (AWD - All-wheel Driving) developed by Mercedes-Benz automobile company. The name 4Matic… Read More
The 2024 Suzuki Jimny range of configurations is currently priced from $34,997. Our most recent… Read More